? all specifications are subject to change without notice. conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. 3-teminal filters for power line ach series type: issue date: ach32c [1206 inch]* ach3218 [1207 inch] ach4518 [1807 inch] * dimensions code [eia] september 2011
all specifications are subject to change without notice. (1/6) 001-03 / 20110928 / e9611_ach 3-terminal filters for power line ach series ach32c features these t-type emc filters comprise ferrite beads and chip capacitors and are engineered to handle high current levels. the series offers even greater attenuation characteristics when used in a stable circuit on the ground. the ach series is ideal for high-density circuit design, since the series is vertically mounted and does not require much mounting space. because guarantee temperature range is ?40 to +125c, it is possible to use in strict environmental condition. available for reflow soldering. applications home electronic equipment, (tvs, vcrs, cd players, dat players, electric musical instruments, pcs, etc.), office automation equip- ment (computers, terminals, stand-alone word processors, fax machines, etc.), factory automation equipment (robots, numerical control devices, process controllers, etc.), automotive electronics (car navigation, ecu, etc.) shapes and dimensions/circuit diagram recommended pc board pattern reflow soldering product identification (1) series name (2) dimensions 32c: 3216 type(3.2 1.6mm) (3) capacitance 103: 10000pf (4) packaging style t: ?180mm reel taping (5) tdk internal code temperature ranges packaging style and quantities recommended soldering conditions recommended temperature profile for lead-free solder reflow profile for solder heat resistance conformity to rohs directive 3.0 1.6 0.2 terminal electrode 3.2 0.2 1.7 0.45 2.1 0.2 0.7 gnd terminal no polarity 3 1 2 gnd dimensions in mm 13 2 ferrite 0.1 marking land pattern dimensions in mm 0.6 4.2 1.0 1.0 0.5 2.6 ach 32c - 103 - t (1) (2) (3) (4) (5) operating ?40 to +125c storage(after mount) ?40 to +125c packaging style reel quantity taping ?180mm 2000 pieces/reel 150?c 180?c peak 245?c max. 230?c 60 to 120s 10 to 30s natural cooling time ( s ) 150?c 180?c peak 260?c max. 230?c 60 to 120s 40s max. natural cooling time ( s ) please contact our sales office when your application is considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
all specifications are subject to change without notice. (2/6) 001-03 / 20110928 / e9611_ach electrical characteristics typical electrical characteristics attenuation vs. frequency characteristics (glass epoxy coated double side mounting pcb) circuit diagram part no. rated voltage edc(v)max. rated current (a)max. insulation resistance (m ? )min. dc resistance (m ? )max. guaranteed attenuation (db) guaranteed frequency bandwidth (mhz) ach32c-100-t001 50 6 100 2 ?15 2000 to 6000 ach32c-220-t001 50 6 100 2 ?15 1300 to 2500 ach32c-470-t001 50 6 100 2 ?15 650 to 2500 ach32c-101-t001 50 6 100 2 ?20 450 to 1300 ach32c-331-t001 50 6 100 2 ?20 200 to 800 ach32c-102-t001 50 6 100 2 ?25 100 to 350 ach32c-222-t001 50 6 100 2 ?25 55 to 300 ach32c-103-t001 50 6 100 2 ?25 30 to 200 ach32c-333-t001 50 6 100 2 ?25 10 to 300 ach32c-104-t001 50 6 100 2 ?25 3.5 to 200 attenuation ( db ) 1 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 10 100 1000 10000 frequency ( mhz ) 331 100 attenuation ( db ) 1 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 10 100 1000 10000 frequency ( mhz ) 220 470 101 attenuation ( db ) 1 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 10 100 1000 10000 frequency ( mhz ) 104 103 102 attenuation ( db ) 1 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 10 100 1000 10000 frequency ( mhz ) 333 222 ach-c series l.m. s.g. 50? 50?
all specifications are subject to change without notice. (3/6) 001-03 / 20110928 / e9611_ach 3-terminal filters for power line ach series ach3218, ach4518 features the ach series consists of products with superior attenuation characteristics, in which the t-type filter circuit is magnetically shielded with ferrite. the series offers even greater attenuation characteristics when used in a stable circuit on the ground. the ach series is ideal for high-density circuit design, since the series is vertically mounted and does not require much mounting space. available for reflow soldering. it is a product conforming to rohs directive. product identification (1) series name (2) dimensions (3) type (4) packaging style (5) tdk internal code temperature ranges packaging style and quantities handling and precautions before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. the inductance value may change due to magnetic saturation if the current exceeds the rated maximum. do not expose the inductors to stray magnetic fields. avoid static electricity discharge during handling. when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive ach 3218 - 223 - t d (1) (2) (3) (4) (5) operating ?40 to +125c storage(after mount) ?40 to +125c packaging style quantity taping 1000 pieces/reel please contact our sales office when your application is considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
all specifications are subject to change without notice. (4/6) 001-03 / 20110928 / e9611_ach ach3218 type shapes and dimensions/circuit diagram recommended pc board pattern reflow soldering electrical characteristics typical electrical characteristics attenuation vs. frequency characteristics measuring circuit part no. 25db attenuation frequency range (mhz) rated voltage edc (v)max. rated current (a)max. dc resistance ( ? )max. [terminal no.1 to 3] insulation resistance (m ? )min. [terminal no.1 to 2/no.2 to 3] ach3218-223 11 to 55 20 1.5 0.06 1000 ach3218-103 17 to 60 20 1.5 0.06 1000 ach3218-682 22 to 75 20 1.5 0.06 1000 ach3218-472 30 to 85 20 1.5 0.06 1000 ach3218-332 37 to 90 20 1.5 0.06 1000 ach3218-222 45 to 105 20 1.5 0.06 1000 ach3218-152 60 to 115 20 1.5 0.06 1000 ach3218-102 80 to 140 20 1.5 0.06 1000 ach3218-681 95 to 150 20 1.5 0.06 1000 ach3218-471 120 to 180 20 1.5 0.06 1000 ach3218-331 130 to 210 20 1.5 0.06 1000 ach3218-221 170 to 250 20 1.5 0.06 1000 ach3218-151 205 to 280 20 1.5 0.06 1000 ach3218-101 265 to 340 20 1.5 0.06 1000 ach3218-680 340 to 420 20 1.5 0.06 1000 ach3218-470 420 to 500 20 1.5 0.06 1000 ach3218-330 500 to 600 20 1.5 0.06 1000 ach3218-220 600 to 700 20 1.5 0.06 1000 1.4 2.2 1.4 1.94 0.6 resist land pattern dimensions in mm 3.2 0.3 2.5 0.25 insulation resin terminal electrode 0.6 1.8 0.2 0.45 13 2 gnd terminal ferrite no polarity 3 1 2 gnd dimensions in mm dimension without tolerance is reference value. attenuation ( db ) 50 40 30 20 10 0 1000 100 300 10 30 13 223 103 682 472 332 222 152 102 681 471 331 221 151 101 680 470 330 220 frequency ( mhz ) ach series l.m. s.g. 50? 50?
all specifications are subject to change without notice. (5/6) 001-03 / 20110928 / e9611_ach ach4518 type shapes and dimensions/circuit diagram recommended pc board pattern reflow soldering electrical characteristics typical electrical characteristics attenuation vs. frequency characteristics measuring circuit part no. 25db attenuation frequency range (mhz) rated voltage edc (v)max. rated current (a)max. dc resistance ( ? )max. [terminal no.1 to 3] insulation resistance (m ? )min. [terminal no.1 to 2/no.2 to 3] ach4518-333 6 to 60 50 2.0 0.06 1000 ach4518-223 9 to 65 50 2.0 0.06 1000 ach4518-153 11 to 70 50 2.0 0.06 1000 ach4518-103 15 to 75 50 2.0 0.06 1000 ach4518-682 20 to 85 50 2.0 0.06 1000 ach4518-472 25 to 90 50 2.0 0.06 1000 ach4518-332 35 to 100 50 2.0 0.06 1000 ach4518-222 40 to 110 50 2.0 0.06 1000 ACH4518-152 50 to 130 50 2.0 0.06 1000 ach4518-102 65 to 150 50 2.0 0.06 1000 ach4518-681 75 to 160 50 2.0 0.06 1000 ach4518-471 95 to 180 50 2.0 0.06 1000 ach4518-331 115 to 205 50 2.0 0.06 1000 ach4518-221 150 to 250 50 2.0 0.06 1000 ach4518-151 190 to 290 50 2.0 0.06 1000 ach4518-101 235 to 335 50 2.0 0.06 1000 ach4518-680 290 to 395 50 2.0 0.06 1000 ach4518-470 360 to 460 50 2.0 0.06 1000 ach4518-330 450 to 550 50 2.0 0.06 1000 ach4518-220 530 to 650 50 2.0 0.06 1000 1.75 3.5 1.75 1.94 1.0 resist land pattern dimensions in mm 4.5 0.4 3.2 0.3 insulation resin terminal electrode 1.0 1.8 0.2 0.45 13 2 gnd terminal ferrite no polarity 3 1 2 gnd dimensions in mm dimension without tolerance is reference value. attenuation ( db ) 60 40 50 30 20 10 0 1000 100 300 10 30 13 frequency ( mhz ) 223 333 153 103 682 472 332 222 152 102 681 471 331 221 151 101 680 470 330 220 ach series l.m. s.g. 50? 50?
all specifications are subject to change without notice. (6/6) 001-03 / 20110928 / e9611_ach packaging styles reel dimensions tape dimensions ty p e a b c d t 321825 2.20.2 3.70.2 4.00.1 2.00.05 3.3max. 451832 2.20.2 5.20.2 4.00.1 2.00.05 3.8max. 1.0 ?178 2.0 2.0 0.5 ?13 0.5 ?21 0.8 ?60 2.0 17.0 1.4 13.0 0.3 dimensions in mm 12.00.3 5.50.05 b 1.750.1 ta 4.0 0.1 cd 1.5 +0.1 ?0.0 dimensions in mm 0.3 to 0.4 sprocket hole cavity 40 to 80 taping 200min. 300min. drawing direction dimensions in mm
|
